 |
|
509 Sinister snowmobile
goggles were designed from the ground up to be, what
we feel, is the first 'true' snowmobile specific
goggle. Every design element and every feature was
specifically engineered to tailor specifically for a
snowmobilers requirements. There is a HUGE
difference between a ski goggle and a 509 snowmobile
specific goggle. So often we see sledders frustrated
with their poorly performing goggles and as no
coincidence they are always a ski or snowboard
brand.
Active snowmobiling
creates a truly unique set of circumstances that ski
goggles simply can not keep up with. First off they
are no designed for MX style helmet compatibility.
They do not have adequate venting to keep up with
the rigors of aggressive riding. 509 goggles address
every issue that is relevant to a snowmobiler and
after just one use, I'm sure you will agree with
thousands of other sledders: There really is no
greater alternative goggle for the snowmobile
market. |
|
|
 |
|
Unlike ski goggles, which use a fixed strap
mount, our goggles are designed to work
specifically with an open faced helmet. The
strap is attached to an articulating hinge
system, which ensures a
perfect fit with any open faced helmet by
allowing the goggle to fit firmly, yet
entirely comfortably against your face.
These articulating
hinges open up, allowing the goggle to sit further
back in your helmet without pulling the sides of the
goggle away from your face. This ensures a perfect
seal against your face every time.
No more air and fog causing moisture leaks inside
the goggle. Hinged strap mounts provide the absolute
best fit with any MX style helmet. One of the
leading causes of fogging is moisture inside the
goggle. Our hinge system eliminates these issues
completely. |
 |
|
|
 |
|
New
for 2009 is a large removable rubber nose mask. This
mask completely covers your nose and extends to
cover parts of your cheeks as well. This added
protection blocks biting wind & stinging snow roost
from battering your exposed nose and cheeks. Say
goodbye to cold, red noses after a long days ride.
Our unique design allows you to easily install or
remove the mask in a matter of seconds. When
installed it says securely fastened and WILL NOT
fall off while in use. It is made with a rigid
plastic upper frame which acts as a secure mounting
base. Below this thin base is the heart of the mask
which is made of a reflexible rubber. The flexible
rubber design allows you to easily put on the
goggles without catching on your helmet. |
 |
|
|
|
|
 |
|
509
goggles have the most comfortable foam in the
industry, bar none. They feature a triple layer
design, which consists of three layers of moisture
wicking foam. These layers have a varying density
which work together in wicking moisture away from
your face and preventing moisture from entering
inside the goggle.
We
have also added oversized foam. This wider foam
extends beyond the frame of the goggle, providing a
larger footprint. This extra foam fills any air gaps
inbetween the goggle and the helmet, blocking cold
wind from hitting exposed skin on your forehead and
cheeks. We also increased the thickness of the foam
to 20mm. At just shy of 1 inch our foam provides the
most comfortable fit on the market. |
 |
|
|
 |
|
509
goggles come standard with a dual pane cold weather
specific lens. The standard lens has a yellow tint,
which is great for low light and definition, and a
chrome finish. The chrome finish is not just for
looks. It refracts bright sunlight away from the
goggles. We improved the optics for 2009 by creating
a curved spherical lens which precisely matches the
curvatures of the goggle frame. This improves the
optics by minimizing light distorting.
All
509 lenses include four foam lined ventilation
ports, 100% UV blocking, anti fog & anti scratch
coating, and shatter proof material. All lenses are
replaceable and interchangeable. They are available
in 11 colors for a variety of different weather
conditions. |
 |
|
|
 |
|
A triple
silicon lining on the inside of the strap, keep the
strap and goggle in place. No more constant
adjusting. Set the strap where you want it, and it
holds firmly in place all day long, ensuring your
goggles are evenly held against your face.
Straps are available in six different straps. All
interchangable between every goggle we make. |
 |
|
|
 |
|
Ventilation is key in a snowmobile specific goggle.
Too much ventilation makes for a cold day. Not
enough and you'll have fogging issues. We engineered
14 vents across the top, sides, bottom, and lens
which create a continual flow of cool comfortable
air, thus exhausting all the hot air out the bottom
of the goggle. This provides for a controlled
climate inside the goggle, keeping you comfortable
and fog free. |
 |
|
|
|
|
|
|
|
ORDER NOW |
|
|
|
 |
| |
|
2009
Features List. [a href="http://www.509films.com/store"]Click
here to order.[/a] |
 |
|
Hinged
Strap Mount / Helmet Compatible |
|
Ah yes,
our world famous 'hinged strap mounts'. These
articulating hinges open up, allowing the goggle to
sit further back in your helmet without pulling the
sides of the goggle away from your face. This
ensures a perfect seal against your face everytime.
No more air and fog causing moisture leaks inside
the goggle. Hinged strap mounts provide the absolute
best fit with any MX style helmet. |
|
|
|
Removable
Nose Mask |
|
Now you
can ditch your bulky breath box with the help of our
large removable nosemask. This rubber mask, securely
attaches to the goggle frame and completely covers
your nose. Blocking any air or moisture from hitting
your nose. Unlike other brands, our mask stays
securely in place, yet removes in seconds if needed.
|
|
|
|
Triple
Layer, Oversized Foam |
|
The most
comfortable foam in the business, bar none. The
oversized foam gives our goggles a bigger footprint,
blocking any air gap between the goggle and helmet.
We also made the foam thicker than ever with just
shy of 1 inch thickness. |
|
|
|
Dual Cold
Weather Chrome Lens |
|
We have
improved our optics with a specially curved
spherical lens that matches the curvature of the
goggle frame. All standard lenses are dual pane &
cold weather specific, which include 4 foam lined
ventilation ports. All goggles come standard with a
yellow tinted, chrome finished lens. 100% UV
blocking & shatter proof. |
|
|
|
Silicon
Lined Straps |
|
A triple
silicon lining on the inside of the strap, keep the
strap and goggle in place. No more constant
adjusting. Set the strap where you want it, and it
holds firmly in place all day long, ensuring your
goggles are evenly held against your face. |
|
|
|
14 Super
Flow Vents |
|
Ventilation is key in a snowmobile specific goggle.
Too much ventilation makes for a cold day. Not
enough and you'll have fogging issues. We engineered
14 vents across the top, sides, bottom, and lens
which create a continual flow of cool comfortable
air, thus exhausting all the hot air out the bottom
of the goggle. This provides for a controlled
climate inside the goggle, keeping you comfortable
and fog free. |
|
|
|
Limited
Lifetime Warranty |
|
We know
our goggles are second to none in terms of quality
and we stand behind them with a lifetime warranty.
This covers the entire frame, hinge system, strap,
trim piece, and nosemask. There is a one year
warranty on the foam and lens. |
|
|
 |

 |
| |
|
Polarized Smoke |
| |
| |
|
Polarized Brown |
| |
| |
|
Polarized Yellow |
| |
| |
|
Chrome/Yellow Tint |
| |
| |
|
Chrome/Orange Tint |
| |
| |
|
Chrome/Blue Tint |
| |
| |
|
Chrome/Clear |
| |
| |
| Blue
Chrome/Blue Tint |
| |
| |
| Blue
Chrome/Orange Tint |
| |
| |
|
Gold/Yellow Tint |
| |
| |
| Yellow Tint |
| |
| |
| Orange
Tint |
| |
| |
| Clear |
| |
| |
| Fire
Mirror/Rose Tint |
| |
| |
| Rose
Tint |
|
|
|
|
| |
|